Customization: | Available |
---|---|
Transmission Rate: | 10/100/1000Mbps |
Communication Mode: | Full-Duplex & Half-Duplex |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Centralized network timing. Control plane and data plane elements. The Cisco® ASR 900 Route Switch Processor (RSP) is the powerful centralized engine that provides these features and more for Cisco ASR 900 Series routers. The ASR 900 Series RSPs (Figures 1-3) address the requirements of converged service provider networks, from Carrier Ethernet technologies to advanced services such as Multiprotocol Label Switching (MPLS). Its three models help providers add innovative traffic management and intelligent packet-switching and routing features. The models include the Cisco ASR 900 Series Route Switch Processor 1 (RSP1A/B), the Cisco ASR 900 Series Route Switch Processor 2 (RSP2A), and the Cisco ASR 900 Series Route Switch Processor 3 (RSP3C). |
The Cisco ASR 902/903 Route Switch Processor 1 (RSP1A/B) is compatible with the following interface modules: (Please refer to the RSP1A/B End-of-Sale Announcement) Cisco ASR 900 Series 1-Port 10GE XFP Module: supports a single 10-Gigabit Ethernet Small Form-Factor Pluggable (XFP) port. Cisco ASR 900 Series 8-Port 1GE RJ45 Module: supports eight copper RJ-45 Gigabit Ethernet ports. Cisco ASR 900 Series 8-Port 1GE SFP Module: supports eight Gigabit Ethernet Small Form-Factor Pluggable (SFP) ports. Cisco ASR 900 Series 14-Port Serial Module: supports 14 serial ports. The 14 ports are composed of six 12-in-1 connectors with support for asynchronous RS-232 interfaces using EIA/TIA-232 DB-25 connectors and two 68-pin connectors, which support up to 8 RS-232 and RS-485 interfaces in full- or half-duplex mode using four RS-232 connectors (DB-25, DB-9, or RJ-45). Cisco ASR 900 Series 16-Port T1/E1 Module: supports 16 T1 or E1 ports. The port type is software configurable per interface module. Mixing T1 and E1 ports on a single interface module is not supported. Cisco ASR 900 Series 4-Port OC3/STM1 or 1-Port OC12/STM4 Module: This combination module is designed to be software configurable in four modes: 4xOC-3, 4xSTM-1, 1xOC12, and 1xSTM-4. If the module is configured for 4xOC-3 or 4xSTM-1, then the individual interfaces can be configured to be clear channel, POS, or channelized in any combination. Support of these modes is software dependent as described in the Cisco IOS XE Software for Cisco ASR 900 Series Router data sheet. The Cisco ASR 902/903 Route Switch Processor 2 (RSP2A) is compatible with all the interface modules that are supported by the Cisco ASR 903 Route Switch Processor 1 (RSP1). In addition, this second-generation RSP is compatible with the following interface modules: (Also refer to the Cisco ASR 900 Series Interface Modules Data sheet for Slot compatibility Matrix) Cisco ASR 900 Series 2-Port 10GE XFP/SFP+ Module: This module supports two 10-Gigabit Ethernet ports. Each individual port can be used as either an XFP port or as a Small Form-Factor Pluggable Plus (SFP+) port. Cisco ASR 900 Series 8-Port 1GE RJ45 and 1-port 10GE SFP+ Module: supports eight copper RJ-45 Gigabit Ethernet ports and one SFP+ port. Cisco ASR 900 Series 8-Port 1GE SFP and 1-port 10GE SFP+ Module: supports eight Gigabit Ethernet SFP ports and one SFP+ port. Cisco ASR 900 Series 8-Port T1/E1 Module: supports 8 T1 or E1 ports. The port type is software configurable per interface module. Mixing T1 and E1 ports on a single interface module is not supported. Cisco ASR 900 Series 16-Port T1/E1 Module: supports 16 T1 or E1 ports. The port type is software configurable per interface module. Mixing T1 and E1 ports on a single interface module is not supported. Cisco ASR 900 Series 32-Port T1/E1 Module: supports 32 T1 or E1 ports. The port type is software configurable per interface module. Mixing T1 and E1 ports on a single interface module is not supported. Cisco ASR 900 Series 12-Port T1/E1 + 4-port DS3/E3 + 4-port OC3/STM-1 or 4-port OC12/STM-4 or 1-Port OC48/STM-16 Module (A900-IMA3G-IMSG). The Cisco ASR 903/907 Route Switch Processor 3 (RSP3C) is compatible with the following multiple Ethernet and TDM/SONET/SDH interface modules: (Also refer to the Cisco ASR 900 Series Interface Modules Datasheet for Slot Compatibility Matrix) Cisco ASR 900 Series 1-Port 100GE CPAK Module: This module supports one 100 Gigabit Ethernet CPAK port. Cisco ASR 900 Series 2-Port 40GE QSFP Module: This module supports two QSFP ports. Cisco ASR 900 Series 8-Port 10GE SFP+ Module: This module supports eight SFP+ ports. Cisco ASR 900 Series 48-Port T1/E1 CEM Module: supports 48 T1 or E1 ports. The port type is software configurable per interface module. Mixing T1 and E1 ports on a single interface module is not supported. Cisco ASR 900 Series 48-Port T3/E3 CEM Module: supports 48 T3 or E3 ports. The port type is software configurable per interface module. Mixing T3 and E3 ports on a single interface module is not supported. Cisco ASR 900 Series 1-Port 10G (OCn/STM-n) and 8-Port 1G (OCn/STMn) CEM and OTN Module: This combination module is designed to be software configurable in different modes: 1 x OC192/STM-64 or either 4xOC48/STM-16, 8xOC3/STM-1, or 8xOC12/STM-4. Cisco ASR 900 Series 12-Port T1/E1 + 4-port DS3/E3 + 4-port OC3/STM-1 or 4-port OC12/STM-4 or 1-Port OC48/STM-16 Module (A900-IMA3G-IMSG). The Cisco ASR 900 Series RSP3C also supports a Global Navigation Satellite System (GNSS) module that allows direct interface to external antennas. The GNSS module is able to support several satellite systems, such as the Global Positioning System (GPS), GLONASS, BEIDU, QZSS, SBAS, and GALILEO. The Cisco ASR 900 Series RSP3C is available in two different sizes in order to support the differences in form factors of the ASR 900 chassis types. The capabilities of the different form factors are identical, and the software is identical as well. The wide form-factor RSP engine (A900-RSP3C-400-W) is supported in the ASR 907 chassis, while the small form-factor RSP engine (A900-RSP3C-400-S) is supported in the ASR 903 chassis. The ASR 900 interface module support is dependent on the combination of the RSP, the chassis, software version, and the interface module slot. The Cisco ASR 900 Series Interface Modules Datasheet contains the compatibility matrix for the several combinations. |
Product ID |
A900-RSP3C-200-S |
A900-RSP3C-400-S A900-RSP3C-400-W |
A900-RSP2A-64 A900-RSP2A-128 |
A903-RSP1A-55 A903-RSP1B-55 |
Power consumption of chassis with 2 power supplies, 1 fan tray, and 1 RSP |
340W |
A900-RSP3C-400-S: 440W A900-RSP3C-400-W: 480W |
A900-RSP2A-64: 120W A900-RSP2A-128: 180W |
A903-RSP1A-55: 195W A903-RSP1B-55: 210W |
RSP memory (DRAM) |
8 GB |
8 GB |
4 GB |
A903-RSP1A-55: 2 GB A903-RSP1B-55: 4 GB |
Flash memory (storage) |
8 GB |
8 GB |
2 GB |
2 GB |
Service scale1, 2, 3 |
Large |
Large |
Base |
A903-RSP1A-55: Base A903-RSP1B-55: Large |
Ethernet interface module compatibility4 |
A900-IMA2F A900-IMA8Z A900-IMA2Z A900-IMA1X A900-IMA8S A900-IMA8S1Z A900-IMA8T A900-IMA8T1Z |
A900-IMA1C A900-IMA2F A900-IMA8Z A900-IMA2Z A900-IMA1X A900-IMA8S A900-IMA8S1Z A900-IMA8T A900-IMA8T1Z A900-IMA1Z8S-CXMS |
A900-IMA1X A900-IMA2Z A900-IMA8S A900-IMA8S1Z A900-IMA8T A900-IMA8T1Z |
A900-IMA1X A900-IMA8S A900-IMA8T |
TDM and ATM interface module compatibility4 |
A900-IMA1Z8S-CX |
A900-IMA1Z8S-CX A900-IMA48D-C A900-IMA48T-C A900-IMA3G-IMSG A900-IMA1Z8S-CXMS |
A900-IMA8D A900-IMA16D A900-IMA32D A900-IMA4OS A900-IMASER14A/S A900-IMA3G-IMSG (RSP2A-128) |
A900-IMA16D A900-IMA4OS A900-IMASER14A/S |
Maximum transmission unit (MTU) |
Configurable MTU of up to 9216 bytes, for bridging on Gigabit Ethernet, 10 and 100 Gigabit Ethernet |
|||
Maximum interface throughput5 |
240 Gbps |
480 Gbps |
A900-RSP2A-64: 64 Gbps A900-RSP2A-128: 128 Gbps |
55 Gbps |
IP version 4 performance |
300 Mpps |
600 Mpps |
A900-RSP2A-64: 95 Mpps A900-RSP2A-128: 180 Mpps |
65 Mpps |
IP version 6 performance |
300 Mpps |
600 Mpps |
A900-RSP2A-64: 95 Mpps A900-RSP2A-128: 180 Mpps |
65 Mpps |
Management ports |
Copper 10/100/1000Base-T LAN management port - RJ45 connector port Console/Aux RS232 serial ports - RJ45 connector port Console - USB 2.0 type A receptacle connector port |
|||
Timing ports6 |
BITS simultaneous input and output (J1/T1/E1) - RJ48 connector port 1 pps input - mini-coax connector port 1 pps output - mini-coax connector port 2.048/10 MHz input - mini-coax connector port 2.048/10 MHz output - mini-coax connector port |
|||
External USB flash memory |
Mass storage - USB 2.0 type A receptacle connector port |
|||
Shipment package size in inches (LxWxH) |
14.38x14.38x6.25 |
A900-RSP3C-400-S: 14.38x14.38x6.25 A900-RSP3C-400-W: 21.75x15.75x6.56 |
14.38x14.38x6.25 |
14.38x14.38x6.25 |
Shipment package weight |
6.2 lbs. |
A900-RSP3C-400-S: 6.2 lbs. A900-RSP3C-400-W: 7.0 lbs. |
6.2 lbs. |
6.2 lbs. |
MTBF at 104°F (40°C) operating temperature |
230,000 hours |
230,000 hours |
400,000 hours |
300,000 hours |