Detailed Photos
Product Parameters
| Product Type |
Gigabit Ethernet Switch |
| Application Level |
Three-layer |
| Transfer rate |
10/100/1000Mbps |
| Exchange method |
Store-and-Forward |
| Backplane bandwidth |
598Gbps/5.98Tbps |
| Packet forwarding rate |
216Mpps/222Mpps |
| MAC address table |
64K |
| Port parameters |
| Port Structure |
Modularity |
| Number of Ports |
28 |
| Port Description |
24 SFP ports (8 of which are combo ports), 4 10G SFP+ ports |
| Control Port |
1 console, 1 RJ-45 console port, 1 Micro USB console port (cannot work at the same time, Micro USB takes priority) |
| Extension modules |
1 expansion slot: 2-port 40GE QSFP+ interface card, 2-port 10G SFP+ interface card, 2-port 10G electrical interface card, 8-port 10G SFP+ interface card, 12-port 10G SFP+ interface card |
| Transmission Mode |
Full Duplex |
| Features |
| Stacking function |
Stackable |
| VLAN |
Support port-based VLAN Support MAC-based VLAN Protocol-based VLAN IP subnet-based VLAN Support QinQ, flexible QinQ Support VLAN Mapping Support Voice VLAN Support MVRP |
| QOS |
Support L2 (Layer 2) ~ L4 (Layer 4) packet filtering function, providing flow classification based on source MAC address, destination MAC address, source IP (IPv4/IPv6) address, destination IP (IPv4/IPv6) address, TCP/UDP port number, and VLAN Support time range ACL Support bidirectional ACL policy in the inbound and outbound directions Support ACL distribution based on VLAN Support limiting the rate at which a port receives and sends packets, with a minimum granularity of 8Kbps Support packet redirection Support 802.1p and DSCP priority re-marking of packets Support CAR (Committed Access Rate) function Support flexible queue scheduling algorithm, which can be set based on ports and queues at the same time, and supports three modes: SP, WRR, and SP+WRR Support WRED |
| Multicast Management |
Support IGMP Snooping v1/v2/v3, MLD Snooping v1/v2 Support PIM Snooping Support MLD Proxy Support multicast VLAN Support IGMP v1/v2/v3, MLD v1/v2* Support PIM-DM, PIM-SM, PIM-SSM Support MSDP, MSDP for IPv6* Support MBGP, MBGP for Ipv6 |
| Network Management |
Support XModem/FTP/TFTP loading and upgrading Support command line interface (CLI), Telnet, and console port configuration Support SNMPv1/v2/v3, WEB network management Support RMON (Remote Monitoring) alarms, events, and history Support iMC intelligent management center Support system logs, hierarchical alarms, and debugging information output Support NTP Support power alarm function, fan, and temperature alarms Support Ping and Tracert Support VCT (Virtual Cable Test) cable detection function Support DLDP (Device Link Detection Protocol) unidirectional link detection protocol Support LLDP Support Loopback-detection port loopback detection |
| Security Management |
Supports user hierarchical management and password protection Supports 802.1X authentication/centralized MAC address authentication Supports Guest VLAN Supports RADIUS authentication Supports SSH 2.0 Supports port isolation Supports port security Supports EAD Supports DHCP Snooping to prevent spoofed DHCP servers Supports dynamic ARP detection to prevent man-in-the-middle attacks and ARP denial of service Supports BPDU guard, Root guard Supports uRPF (Unicast Reverse Path Detection) to prevent IP source address spoofing, prevent viruses and attacks Supports IP/Port/MAC binding function Supports plain text and MD5 cipher text authentication of OSPF and RIPv2 messages Supports PKI (Public Key Infrastructure) |
| Other parameters |
| Supply voltage |
AC: Rated voltage range: 100V~240V AC, 50/60Hz
DC: Input rated voltage range -48V~-60V DC |
| Power |
Power consumption (static)
Single: AC: 24W, DC: 24W
Dual: AC: 30W, DC: 29W
Power consumption (full load)
Single: AC: 112W, DC: 113W
Dual: AC: 116W, DC: 122W |
| Product size |
440×360×43.6mm |
| Product Weight |
≤6.6kg |
| Environmental Standards |
Working environment temperature: 0ºC~45ºC
Working environment relative humidity (non-condensing): 5%~95% |
|
|
Packaging & Shipping
LS-5560X-30F-EI is sealed in original box. We will also pack
LS-5560X-30F-EI with second box before shipping.
Payment and shipment
LS-5560X-30F-EI Payment Method
T/T,Western Union and Money Gram will be accept. Faster payment will help you to get the items earlier.
LS-5560X-30F-EI Shipment Method
The
LS-5560X-30F-EI will be send via FedEx,DHL,TNT,UPS,EMS and so on. but the buyer is responsible for customs clearance and pay tariff when
LS-5560X-30F-EI arrived destination country.
Our Advantages
FAQ
Q. Are your products in factory sealed packaging?
A: Yes, we only sell products that are factory sealed packaging.
Q. Can I get discount?
A: Definitely. it is based on the quantity. More quantity and more attractive price.
Q. What is the payment terms?
A: We accept the T/T, payment and western union payment.
Q. Can you be responsible for the shipment?
A: We will organize and schedule all shipment. And the goods all ship it via air.Usually,we are use FedEx and DHL, this will ensure delivery within seven days.
Q. What is the lead time?
A: We have in stock and able to ship the goods the same day after received the payment.
Audited Supplier 
){kind=link}